ENTER SERVICE MODE TO SONY KP-57WV600 _ KP-57WV700 _ KP-65WV600 _ KP-65WV700 [PROJECTION TV]

All the circuit adjustment to these sets can be made  using remote control [RM-Y188]

Enter to service mode.

* TV must be in standby mode.

** Press [DISPLAY => 5 => VOLUME UP => POWER].

Press each button within one second of pressing the previous button.

 On the service menu display;

3D-COMB => CATEGORY.
0 => ITEM NUMBER.
0 => DATA
NRMD => ADJUSTMENT ITEM.

*** The screen displays the item being adjusted within that category.
**** Press [1] & [4] digit buttons on the remote to select an item for adjustment.
***** Press [3]&[6] digit buttons on the remote to change the data value to selected item.
****** Press [2]&[5] digit buttons on the remote to select the adjustment category.  Every time you pres digit [2], the service mode changes.
******* If you want to go back to the most recently saved value, press [0] to read the memory.
******** Press [Muting] and then [Enter] buttons on the remote to wirite the newly adjusted data into memory.
********* To exit from the service menu, turn the power of by the ON/OFF switch at the front panel of the Tv.

Pressing digit [8] and then [Enter], to restore the factory settings for user control and channel memories.

Memory Write Confirmation.

* After adjustment, turn the Power OFF with the remote control.
** Turn the power ON and set to Service Mode.
*** Select and check the adjusted item/s, and confirm that the adjustments were saved.