To enter service mode:
Press and Hold "Green" button on the remote control, press (P Dn) button on the cabinet front.
The service menu displays.
Use [Prog Up & Prog Dn] buttons on the remote control to highlight the the service menu you require, and press F/OK button to enter the adjusted data value into memory.
To exit from service meny, press "Menu:" button to navigate ackwards through the service menus until menus disappear.
SERVICE ADJUSTMENTS after memory ic replacement
To initilize the memory IC, Press and Hold [NORMAL --> . <--] button on the remmote control, and then press the (P Dn) button on the front panel of the TV set, and turn the Mains Switch OFF and then ON. The initilization is now completed.
No comments:
Post a Comment