To enter service mode to these sets, press 'Menu" button.
Enter 1-1-4-7 by remote digit buttons. The service menu window will be displayed.
INT-TV [Initilize TV] => Set to "1" if necessary to reset the EEPROM, and wait for 10 seconds till the memory is erased. Now switch OFF the set by mains ON/OFF switch at the front panel of the TV.
Screen voltage adjustment. ST.IN/OUT => Adjsut the screen knowb at the EGT transformer very slowly from counter clckwise to clockwase, until you find the transition at "ST IN ABOVE/BELOW" displays on the secteen
To exit from service mode, press RCL key on remote control
The default unlock code for Child Lock is "8-8-8-8".
Enter 1-1-4-7 by remote digit buttons. The service menu window will be displayed.
INT-TV [Initilize TV] => Set to "1" if necessary to reset the EEPROM, and wait for 10 seconds till the memory is erased. Now switch OFF the set by mains ON/OFF switch at the front panel of the TV.
Screen voltage adjustment. ST.IN/OUT => Adjsut the screen knowb at the EGT transformer very slowly from counter clckwise to clockwase, until you find the transition at "ST IN ABOVE/BELOW" displays on the secteen
To exit from service mode, press RCL key on remote control
The default unlock code for Child Lock is "8-8-8-8".
Pls tell me the remote control model No. suited for the Tvs fitted with PHILIPS KIT [CALCOM UOC CHASIS] in order to enter service mode? Is it available in market now?
ReplyDeleteRemote control for Calcom TV kit is available in the market. Just buy one, which can be used with Calcom kits [I, II,& III.]
ReplyDelete