HOW TO ENTER SERVICE MODE TO VIDEOCON/SANSUI TVs

• To enter into service mode to these sets, press the service key [S].
• If you press numerical key 1, the set will put into service mode.
• Pressing digit key 2, the set will be put into Design mode.
• Pressing digit key 3, will put the set into factory reset.
• Pressing digit key 4, will put the set into Manufacturing mode.
• To select an item to adjust, use [CH Up / CH Dn] keys on the remote control.
• To adjust the data value of the selected item, use [Vol+ / Vol--ve] keys.
• Press service key [S] again, to quit service mode.