HOW TO PROGRAMME DISH TV WITH OR WITHOUT REMOTE CODES.

PROGRAMME WITH CODES
Find the TV codes for your TV from the code list of the remote control.
Press TV button on the remote control, and hold down it, until 'SAT" "VCR" & "AUX" buttons on the remote control lights up. Release the tV button.  Now the led will be flashing.
Enter the code by kepad of the remote control. If you enter the code and press the # key, remote will control all functions of the TV.
Press the power button to turn OFF the TV. Turn it back ON again.  If the entered code was correct, the TV will turn OFF and ON.
If the TV does not respond, try an other code.  Repeat all steps above.

PROGRAMME WITHOUT CODES

Press the TV button on the remote control, and hold it down until "SAT" "AUX" & "VCR" buttons light up, and release the TV button.
Press and release the "Power" button on the remote control.
Press the 'Arrow UP' key.  If the TV do not turn OFF, press arrow button again. Press arrow button continiously until the TV turns OFF.  Press the arrow key and wait at least 30 seconds to see whether the code send by the remote works with TV.  Do not press the Arrow Up key fast.