ONIDA 21XSW4 SERIES
To enter service mode, press 'VSM" & "+" buttons on the remote control simoultaneously.
To call an item to adjust, use "UP" or "DOWN" buttons.
To change the value of selected item, use "Vol+" & "Vol-vd" buttons.
ONIDA /JVC AV-29PRO
To enter service mode, Set the Loudness to "04" first.
Press 'Display" and "Menu" button on the remote control simoultaneously.
ONIDA/JVC A32020.
To enter service mode, set Sleep Tmer to [0] first.
Press 'Display" and "AV" buttons on the remote control simoultaneously.
ONIDA/JVC AV 29 TH3ER.
To enter service mode, press "Mute" and "Information" buttons.
ONIDA/JVC AV 25TS2EK. [Processor used: M37204MCC40 SP]
To enter service mode, Press "1" and "Mute" button.
To exit from service mode, Press "TV" button.
ONIDA/IGO [PROMISE-14] & [PROMISE-20]
To enter service mode, press "VSM" and "Display" button on the remote control simoultaneously.
To call an item to adjust, use CH+ & CH-ve buttons.
To adjust the data value to selected item, press Vol+/Vol-ve buttons.
To exit from service mode, press "Display" button.
ONIDA/JVC [C 21ZE _ AV G140T _ AV 210T _ AV 14ME _ AV 14TE _ AV 21TE _ AV G21T _ AV G250MX _ 21A4EE _ 21F4EE] [ PROCESSOR USED: M37102M8-C41SP]
To enter service mode, Press "Display" and then "Picture moode" buttons on the front panel of the TV set.
Service Menu-1: VSM PRESET.
Use this service menu to change pre- installation of brightness, contrast and color.
Service Menu-2 : SUB VSM
Use this service menu to switching of standards chromatically.
Service Menu-3 : IF V/C
Use this service menu to change adjustment to correction of raster and Modes RGB matrix.
SYSTEM CONSTANT
Use picture adjust button to access any parameter and use Picture Adjust [+ / -] buttons to change the value of the selected item.
TO STORE ADJUSTED ITEM INTO MEMORY
Press "OFF Timer" button.
To return to normal screen, press "Mute" button [twice].
ONIDA/JVC AV 25VM1EN _ AV 28VM1EN
To enter service mode, press "Display" and "Cinema/Game" button.
To exit from service mode, press "Display" button.