HOW TO PROGRAM A SET TOP BOX REMOTE CONTROL

DIRECT CODE ENTER METHOD

1. Turn ON the equipment you wish to program. [TV / VCR / DVD or AUX].
2. Press SIMULTANEOUSLY the device button to be programmed [TV /VCR / DVD or AUX]; and the 'Enter' button for more than 3 seconds.  The device LED will turn ON, indicating the unit is ready to be programmed. (Th device LED will stay lit for about 20 seconds.  The next step must be entered while the LED is ON)
3. Point the remote control towards the equipment, and enter the code number assigned to your brand from the code list of the remote control.  (The equipment will turn OFF, when the correct code number has been entered.  You can verify you have selected the correct code by pressing the "Power" button.  The equipment should turn ON of turn OFF). [If there is more than one code listed for your brand, try one code number at a time, until you equipment turns OFF].
4. Store the entered code number pressing the same Device button once again. The device LED will blink twice to confirm that the code entered was correct.  (Try all functions on the remote control.  If any function do not work as they should, repeat from step [2], using the next code from the code list for the same brand)

CODE AUTO SEARCH METHOD

1. Turn ON the equipment you wish to operate.
2. Press the device button [TV / VCR or AUX] to be programmed and the "Enter" button simultaneously for more than [3] seconds.  The device LED will turn ON.  (The device LED will light up for about 20 seconds, and withing this time, the next step must be done.
3. Press Channel UP or Channel DN button, one step at a time or keep it pressed. The remote will emit a series of Power ON/OFF commands.  Release the Channel UP or Channel DN button, as soon as the equipment turns OFF)  [You can verify that you selected the correct code by pressing the 'Power' button.  The equipment should either turn ON or OFF]
4. Press the same Device button to store the code.  The device LED will blink twice to confirm that the code has been stored.

TO FIND THE CODE NUMBER THAT WAS STORED IN THE DEVICE DURING ATUO-SEARCH

1. Press the 'Device' button you wish to verify and the 'Enter' button simultaneously for more than 3 seconds.(The device LED will turn on for 20 seconds.  The next step should be entered while the LED is ON.) 
2. Press "Info" button. [The device LED will blink number of times, indicating the number of each digit of the code number.  Each digit is separated by [one] second interval of LED being turned OFF.]  (for example, One blink, three blinks with an interval of [1] second of LED being turned OFF, indicates the code number is (138)) Note:  Ten blinks is equal to the number [0].