ELTA - EL20M05TXS
- Open the remote control and short the IC pins {10 & 17} momentary. {Remote control should be loaded with batteries, and its infrared LED should point to TV} [A skilled work]
- The service mode window will be displayed.
- Use "Red / Green / Blue and Yellow" button on the remote control for Menu Adjust.
- To call an item to adjust, use "Prog Up / Prog Dn" buttons on the remote control.
- To adjust the data value to selected item, use "Vol Up / Vol Dn" button on the remote control.
- To Save adjusted data value to memory, press "OK" button on the remote control, and Restart the TV to "Exit" service mode.
FUJITEC FTC SERIES TVs
- Open the remote control, and locate the button {service button}, just above the 'Mute" button. To access it, there is a small hole on the remote control. If the hole is not there, make a small hole there. Be careful, not to damage the remote control.
- Can access the Service mode, by pressing this button.
- User "Prog Up / Prog Dn" button on the remote control, to call an item to adjust.
- Use "Vol Up / Vol Dn" button on the remote control to adjust the data value to selected item.
- Press {Power} button on the remote control, to Save the adjusted data into memory, and to "Exit' Service Mode.