TO ENTER SERVICE MODE
- Press simultaneously the [Information] & [Mute] of the remote control.
- Service Menu screen will be displayed.
SERVICE MENU SCREEN
--------------------------------------------------------------
SERVICE MENU
1. IF 2. V/C
3. AUDIO 4. DEF
5. VSM PRESET 6. STATUS
7. PIP 8. --------
9. SHIPPING (OFF) 0. BUS FREE
1-9: SELECT I;: EXIT
-------------------------------------------------------------
- Press one of 1 to 5 keys of the remote control unit and select the Sub-Menu Screen from the main Service Menu showed above.
METHOD OF SETTING
- VCO => It must be adjust without no-signal.
- 1 key => Select 1. IF.
- 1 key => Select 1. VCO(CW). Make sure that the arrow position between the ABOVE REF and BELOW REF.
- Information key => Return to the Service Menu screen.
- 2 to 5 keys => Select one from 2.V/C, 3. AUDIO, 4. DEF and 5.VSM PRESET.
- Function [Up / Dn] key => Select items.
- Function (< / >) keys => Set the setting value of selected item.
- MENU key => Memorize the setting value. Before storing the setting value in memory, do not press CH,TV,POWER ON/OFF key. If do do, the values will not be stored in memory.
- Do not set [6. Status, 7. PIP, 9. Shipping(Off) & 0. Bus Free.
- After completing the setting, return to the Service Menu, then again press [information] key to exit.
SUB MENU SCREEN
--------------------------------------------------------
1.IF
2. V/C
3. AUDIO ]X]
4. DEF
5. VSM PRESET
6. STATUS [X]
7. PIP [X]
8. ------- [X]
9. SHIPPING (OFF) [X]
0. BUS FREE [X]
-----------------------------------------------
x = DO NOT ADJUST