TO ENTER SERVICE MODE
- Turn Off the power to put the set in Standby Mode.
- In order to enter Service Mode press [Mute => 1 => 8 => 2 => Power] buttons on the remote control.
- The initial Display State of service mode:
=================================================
DDP1011(L6)
DNle
ADV7401(M)
ADV7401(S)
Xilleon226
uPD64083
CCA (ON)
Cinema CCA
SP Actuator
ESP
CHACKSUM 0000
OPTION
SERVICE
T_HUR2AUS0_XXXX
200X_XX_XX
T-HURCOM5_XXXX
T-HUR2AUS1_XXXX
==================================================
BUTTONS OPERATION WITHIN THE SERVICE MODE
- To select an item to adjust, use Up / Dn buttons on the remote control
- To adjust the data value to selected item, use Right / Left buttons on the remote control.
- To select Full Menu display / Move to Parent menu, press the "Menu" button.
- Press 'source' button to cycle through active input source that are connected to the unit.