SHARP LCD TV SERVICE MODE - GENERAL PROCEDURE - TO MOST MODELS
- While the TV is switched ON, unplug the power cord from AC wall socket.
- Press and hold Both "Input & Volume (-)" buttons on the frnt panel of the TV, and re-plug back the AC power cord into wall Power socket.
- If "K" is displayed on the screen when the TV power up, means the tV is in service mode.
- On the front panel of the TV, press [Vol (-) & Ch (-)] and release.
- The service menu will be displayed.
- To call an item to adjust, use "CH + / CH -ve" button on the remote control.
- To adjust the data value to selected item, use "Vol + & Vol - button on the remote control.
- To "Exit" service mode, switch OFF the TV.