[1]
- Set the TV to a Non-TV input, such as AV or SCART.
- Enter [2 > 3 > 4 > 5 > Menu] in sequence by the remote control.
- Service Menu will be displayed.
[2]
- Press "Volume Dn & Channel Up" and hold them for more than 4 seconds.
- The screen will go out and the picture will reappear.
- Press "Menu" button
[3]
- Press the "Volume Dn & Menu" buttons on the TV panel for more than 3 seconds.
- A menu will be appear at the lower right corner of the screen.
- Use 'Direction' keys around "OK" button to call an item to adjust, and to change the data value to the selected item.
- Can access a Picture Menu, BWE menu or Tweak Menu by this way.
- Press any key on the remote control to Exit service mode.
[4]
- Press and Hold "Volume Up & Channel Down" buttons on the TV panel for more than 4 seconds.
- Service menu will be displayed.
- To "EXIT' press 'Menu' button.