BENQ - E2400HD _ LCD TV _ DISASSEMBLE PROCEDURE

REMOVE THE STAND AND BASE ASS'Y

• Place the monitor face down on a smooth surface.  Remove the 4 screws to remove the stand ass'y.

REMOVE THE REAR COVER

• The markings shown in Green are the hooks that should put attention to when remove the rear cover. Use plastic putty knife to release the hooks, and remove the back cover.

BAZEL REMOVAL

• Release 4 screws marked to remove the bezel.  Remove the USB shield.

• Remove the 4 screws on the side of the main frame first, and then disconnect the lamp connections and LVDS cable connection.

REMOVE MAIN BOARD AND POWER BOARD

• Remove the screws marked and disconnect all connections.