AUTO DOWNLOAD
- Enter Service Mode by pushing "ADJ" key.
- Enter EDID D/L mode.
- Enter "Start" by pushing 'OK" key.
EDID data and Model Option download (RS232)
|
ITEM
|
CMD 1
|
CMD 2
|
DATA
|
DATA
|
|
|
Download ‘Mode In’
|
A
|
A
|
0
|
0
|
When transfer the ‘Mode In’ Carry the command.
|
|
Download
|
A
|
E
|
00
|
10
|
Automatically Download [The use of an internal pattern]
|
MANUAL DOWNLOAD
- Use proper signal cable for EDID download
- Analog EDID: Pin 3 exists.
- Digital EDID: Pin 3 exists.
- Never connect HDMI & D-Sub cable at the same time.
- Use proper cables below for EDID Writing.
- Download HDMI 1, HDMI 2 separately, because HDMI 1 is different to HDMI 2.
For Analog EDID : D-sub ot D-sub cable.
For HDMI EDID: DVI to HDMI or HDMI to HDMI
DETAILS OF EDID OPTIONS
|
Model name
|
HEX
|
EDID table
|
DDC Function
|
|
FHD MODEL
|
0001
|
01 00
|
ANALOG/DIGITAL
|
|
HD MODEL
|
0000
|
00 00
|
ANALOG/DIGITAL
|
V-Com Adjust: [Only 37 / 42 / 47LH4000-ZA]
- The V-Com [Common] voltage is a reference voltage of Liquid Crystal Driving. Liquid crystal need polarity change with every frame.
ADJUST SEQUENCE
- Push "ADJ" key to enter Service Mode.
- Enter "V-Com adjustment" mode by pushing (>) key at "10 V-Com". As pushing the right or left button on the remote control, find the V-Com value that is stopped the Flicker. If there is no Flicker at default value, turn down or up at least 20 step and check the Flciker. Then go to default value.
No comments:
Post a Comment