PANASONIC - DMR-EH50EG _ SERVICE MODE _ Service Help

Contn:

                                               [3]

TO ENTER SERVICE MODE

• With Power Off [Standby], simultaneously press {REC + Ch Up + Open/Close} buttons for more than 5 seconds.  
• Service Mode drive will appear.
• If the drive mode is enabled for 'Energy Saving', disable it to access service mode.

FORCED OFF TEAM

• It is possible that due to some reasons the unit is blocked.  If this is the situation, press 'Power' button for more than 10 seconds, forcing shut down unit.

The components that are within the exchange procedure should not be manipulated in any way.

PCB DIGITAL [VEP79106B]

  

The information recorded in the Hard Disc is encrypted with a key each carrying digital PCB. When replacing digital PCB system will recognize that encryption key is different to that used in the information recorded on the Hard Disc, whereby system will force this formatting.

DVD RAM DRIVE - VXY1872

The drive comes Reference screen printed on the top this, in case of doubt confirm the label model with control bottom.

CONNECTOR DETAILS

The PCB which incoperates the Drive at the Drive at the Lower Part of this is inseperatable stores the servo tuning parameters.

HARD DRIVE [HDD] {RFKV0047HDK}

If replacing the original Hard Drive, verify the position of the bridge carrying source configuration.  The information is recorded on the Disc Drive is encrypted with a key that each digital PCB leads.  In case of replacing the Hard Drive, the system carrying force formatting.