Electro help: PHILIPS - 37PFL 5603D _ LCD TV

SERVICE DEFAULT MODE

Purpose:

To create a pre-defined setting, to get the same measurement result as given here
To override SW protections detected by standby processor and to make the TV start up to the step just before protection; a sort of automatic stew-wise start up.
To override SW protections detected by MIPS
To start the Blinking LED procedure

DEFAULT SDM SETTING

Region	Freq. [MHz]	Default system
Europe, AP [PAL/Multi]	475.25	PAL B/G
Europe, AP DVB-T	546.00 PID Video: 0B 06 PID PCR: 0B 06 PID Audio: 0B 07	DVB-T

All picture settings at 50% [Brightness, Contrast, Color]
All sound settings at 50%, except volume at 25%
All service unfriendly modes; if present; are disabled, like sleep Timer - Child/Permanent Lock.
Picture mode mute. [Blue mute or Black mute]
Automatic volume levelling [AVL].
Skip / blank of non-favorite pre-sets.

TO ACTIVATE SDM [Service Default Mode]

Analogue SDM: Use the standard remote control and key in code {0 => 6 => 2 => 9 => 6}, directly followed by "Menu". It is possible that, together with the SDM, the Main Menu will appear. To switch it 'OFF', push the 'Menu' button again.
Digital SDM: Use the standard remote control, key in {0 => 6 => 2 => 5 => 9 => 3}, directly followed by 'Menu' button. It is possible that with the SDM, the Main Menu will appear. To switch it OFF, push the 'Menu' button again.
Analogue SDM can also be activated by shorting for a moment the two solder pads on SSB, [see the figure given below], with the indication 'SDM'. Activation can be performed in all modes, except when the set has a problem with the Stand-by processor.

After activating this mode, "SDM" will appear in the Upper Right corner of the screen.

TO NAVIGATE

When 'Menu' button is pressed, the set will toggle between the SDM and normal user menu; with SDM mode still active in the background.

TO EXIT 'SDM'

Use one of the following methods

Contd:

Electro help