Contn:
[2]
Remove four screws from the shield and lift up the shield-panel.
Lift up the panel
LW-17M11C
Place the monitor face down. remove four screws from the stand & remove four screws from the rear cover. {Remove screw grip don't on the stand fall the stand from the top side of the foot}
Insert the opening drive into the grooves at each side, and press until it clicks. Disconnect the IR cable & speaker cable from the shield.
Remove 8 screws from the shield and disconnect shield.
Remove four screws IR board, and remove four screws power board.
Remove 2 screws from the power shield and disconnect inverter cable.
Disconnect LVDS cable from the main board and lift up the panel.
Panel have been disconnected from the above figure.
Do the reverse proceedings to re-assemble. Be sure to note the size of all screws.
[2]
Remove four screws from the shield and lift up the shield-panel.
Place the monitor face down. remove four screws from the stand & remove four screws from the rear cover. {Remove screw grip don't on the stand fall the stand from the top side of the foot}
