SHARP - LC-26AD5E-BK_LCD TV_ EEPROM DATA UPDATE PROCEDURE

• Remove the back cover.  Switch On the set, and make it Standby Mode.
• Using MICOM PROGRAM JIG KIT 25-4 (JG203), connect the PC terminal and pin 1-4 of CP802 on the Main PCB {JG203 (Red Wire) = 1 pin of CP802}
• Set the EU LCD MICON VER UP ROM DISC (JG176) to PC.
• Start 'VCTP' (Writing Tools).
• Press "NVM" 

• Press "Change" and select writing EEPROM data file (TEXT file).

• Press 'Update NVM ' file.

• The following window will appear, writing will start.  After the finishing of writing, the window will close.

• Finish the writing, unplug AC cord, and remove MICON PROGRAM JIG KIT 25-4.
• Insert the AC cord again.  Turn On Power.
• Press both, "Volume Down' button on the TV, and "Channel-2" button on the remote control for 2 seconds.
• Confirm the displayed version agreement with writing.