Friday, October 19, 2012

SONY KDL-22 EX320, EX321, EX325, EX421, EX425, EX520 EX521, EX523, EX524, EX525; KDL-24 EX320, EX321, EX325, EX421, EX425, EX520 EX521, EX523, EX524, EX525; KDL-26 EX320, EX321, EX325, EX421, EX425, EX520 EX521, EX523, EX524, EX525; KDL-32 EX320, EX321, EX325, EX421, EX425, EX520 EX521, EX523, EX524, EX525; KDL-40 EX320, EX321, EX325, EX421, EX425, EX520 EX521, EX523, EX524, EX525; KDL-46 EX320, EX321, EX325, EX421, EX425, EX520 EX521, EX523, EX524, EX525; KDL-55 EX320, EX321, EX325, EX421, EX425, EX520 EX521, EX523, EX524, EX525; _SERVICE MODE_LED BLINKING CODES _ Service Help



APPLICABLE TO: SONY

KDL-22 EX320, EX321, EX325, EX421, EX425, EX520 EX521, EX523, EX524, EX525;
KDL-24 EX320, EX321, EX325, EX421, EX425, EX520 EX521, EX523, EX524, EX525;
KDL-26 EX320, EX321, EX325, EX421, EX425, EX520 EX521, EX523, EX524, EX525;
KDL-32 EX320, EX321, EX325, EX421, EX425, EX520 EX521, EX523, EX524, EX525;
KDL-40 EX320, EX321, EX325, EX421, EX425, EX520 EX521, EX523, EX524, EX525;
KDL-46 EX320, EX321, EX325, EX421, EX425, EX520 EX521, EX523, EX524, EX525;
KDL-55 EX320, EX321, EX325, EX421, EX425, EX520 EX521, EX523, EX524, EX525;



SELF DIAGNOSIS FUNCTION

When an error occurs, the Standby LED will flash a set number of times to indicate the possible cause of the problem.  If there is more than one error, the LED will identify the first of the problem areas.  Result for all of the diagnostic  items are displayed on the screen.  If the screen displays a '0', no error has occurred.

Standby LED flash time
Service menu item
Diagonostic item description

2
MAIN_POWE
Main power over voltage protection.
3
DC_ALERT
AUD_PROT
DC_ALERT
Audio abnormal detection.
4
BALANCER
Not used
5
TCON_ERR
HFR_ERR
P_ID_ERR
Not used
Not used
Panel ID NVM error.
6
BACKLITE
Back light error [Panel inverter] or power Board error.
7
TEMP_ERR
FAN_ERR
Thermal error.
Fan error.
8
--------
Software error.
9 to 12 blinks
--------
Not used

  • For errors with symptoms such as "Power sometimes shuts off" or "Screen sometimes goes out" that cannot be confirmed, it is not possible to bring up past occurrences or failure for confirmation on screen.
TO BRING-UP SCREEN TEST
  • Press {Display => Channel-5 => Volume (-) => Tv Power}
TO ENTER INTO SERVICE MODE
  • Press [Display => Channel-5 => Volume (+) => Tv Power]


No comments:

Post a Comment