HAIER - HLC19K1 _ SERVICE MODE

TO ENTER SERVICE MODE

• Press "Menu" button.
• Input {8,8,9,3}
• Press "OK"
• Press "Exit"button to exit service mode.

Auto color

The option could only be used in the VGA and Component model. When we found the color in the two models was abnormal. Then we can use the function to adjust it automatically.

Range Scan: The function could make it to search the channels by differentiation the analog and digital channels.

Single RF Scan: Search channels in the frequency scope set in advance.

Burning Mode:

Turn it “ON” to enter the aging model, This is for factory run-in testing. The screen would display

red, green, blue and black screen repeatedly. Each color screen could be exam at that time.

Clean Storage: The function could make the model turn back to the factory default setting.