TO INITIALIZE THE UNIT
This device employs a microprocessor to perform various functions and operations. If interference generated by an external power supply, radio wave, or other electrical source results in accident which causes the specified operations and functions to operate abnormally.
- Press and hold down the DVD button, then press the Speakers A button.
- After "CLEAR" is displayed, the preset memory and each mode stored in the memory, such as surround, are initialized and will return to the factory setting. Unplug the power supply cord from outlet.
MEMORY PRESERVATION
This unit does not require
memory preservation batteries. A built-in memory power back-up system preserves
the contents of the memory during power failures and even when the unit is unplugged.
The unit must be plugged in order to charge the back-up system.
The memory preservation
period after the unit has been unplugged varies depending on climate and
placement of the unit. On the average, memory contents are protected over a period
of a few weeks after the last time the unit has been unplugged. This period is
shorter when the unit is exposed to a highly humid climate.
No comments:
Post a Comment