RCA - DTA-800 _ SETUP METHOD _ DIGITAL TV CONVERTER BOX

TO PROGRAM THE SUPPLIED REMOTE CONTROL

     Can control TV sets of all major brands after programming the Converter Box remote control with the PGM key. RCA TV sets can be controlled directly without programming. Refer to the steps below and the separate Program Code leaflet to guide you through the programming.

1. Refer to the separate Program Code leaflet. Look for the brand of your TV set and a 3-digit program code next to it. There may be more than one program code available. Choose any one of them.  If your TV set is not on the list, skip the rest of this section and go to “Step 4: Initial setup of the converter box”.
2. Press PGM on the remote control. The signal indicator on it remains lit.
3. Enter the 3-digit program code with the number keys. Press OK for confirmation. The signal indicator will be off when the program is done.
4. Press the volume keys on this remote control to check if they can adjust the volume of your TV set.

• If you fail to control your TV set, repeat steps 2 to 4 to program again. Try another program code if there is more than one for your TV brand.
• If the signal indicator remains lit after blinking four times, you may have entered the wrong code. Repeat steps 3 to 4 to program again. Make sure you have correctly entered the code.
• Refer to User Manual for controlling some features of your TV set with this remote control.

INITIAL SETUP OF THE CONVERTER BOX

• Press BOX Power on the remote control to turn on the Converter Box.
• Press TV Power (or use the TV remote control) to turn on the TV set.

Press INPUT up to four times (or use the TV remote control) to select the channel on your TV set to view images from the converter box. Language setup Screen should appear.

If you cannot see the above screen on your TV set, check that:

1. If the converter box has been turned on,
2. If you have programmed the remote control so that the TV input channel can be selected correctly,
3. If you have correctly connected the TV set with the Converter Box.

• Press 1 (for English), 2 (for Spanish) or 3 (for French) to select the menu language.
• Press 1 to start automatic channel search.

1. If a Smart Antenna is connected, press 1 for Quick Scan or 2 for Full Scan. A full scan with Smart Antenna may take around 40-50 minutes.
2. When the scan fi nishes, the Channel List menu displays the found channels.
3. Reposition the antenna and perform the automatic channel scan again if you cannot find all available channels.

• The Channel List shows after scanning, press’UP’ or’DN’ to highlight a channel and press OK to start viewing.