SHARP - CRT TVs AND LCD TVs _ SERVICE MODE

LCD TVs SERVICE MODE

• While the Sharp LCD is on, unplug the power cable.
• Then while pressing the{INPUT & VOL - } buttons on the control remote, plug the power cable back into the power socket.
• When it powers up you will see a little “k” appear in brackets.
• Then on the Sharp TV, press and hold {VOL- & CH-} down and release.
• The Service Menu will be displayed.
• To navigate use {CH+ CH-} buttons.
•  Use {VOL+ VOL-} buttons to adjust the data  value

CRT TVs

• Unplug the TV.
• Press and hold the {VOL- & CH+} buttons.
• While holding the above buttons, plug in the Sharp TV.
• The TV will turn on with the Service Menu displayed.
• To navigate use CH+ CH- buttons.
•  Use VOL+ VOL- buttons to adjust the value.