SPORTSART - T680 - TREADMILL _ ERROR CODES

ERROR MESSAGES DISPLAY FORMAT: [ ERROR_X_Y_ ]

X and Y above are placeholders.  In their space are digits.
The X placeholder represents the following category of abnormalities.

Digit-1 :  Servo Motor Abnormality.
Digit-2:  IGBT [ Insulated-Gate Bipolar Transistor ] abnormality.
Digit-3:  Incline motor abnormality.
Digit-4:  Power supply abnormality.
Digit-8:  Signal abnormality.

• ERROR _1_1_  SERVO MOTOR ENCODER MALFUNCTION.  RE-START MACHINE.
• ERROR_1_2_   SERVO MOTOR HAS OVERHEATED.  UNIT OPERATES AT HALF SPEED.
• ERROR _ 1_3_  SERVO MOTOR SPEED UP WITHOUT COMMAND.  RE-START MACHINE.
• ERROR_2_1_  'IGBT' EXCESSIVE CURRENT.  RE-START MACHINE.
• ERROR_2_2_  'IGBT' EXCESSIVE HEAT.  UNIT OPERATES AT HALF SPEED.
• ERROR_3_1_  INCLINE MOTOR RE-CALIBRATION ERROR.
• ERROR_4_1_  POWER SWITCHED OFF.
• ERROR_4_2_  POWER SUPPLY VOLTAGE TOO LOW.  RE-START UNIT AFTER POWER SUPPLY IS STABILIZED.
• ERROR_4_3_  POWER SUPPLY VOLTAGE IS TOO HIGH.  RE-START UNIT AFTER POWER SUPPLY IS STABILIZED.
• ERROR_8_1_  SIGNAL ERROR UPON START UP.
• ERROR_8_2_  SIGNAL ERROR AFTER START UP.