Sunday, November 25, 2012

WATSON - TW 204M _ SERVICE MODE _ ADJUSTMENT

How to enter service mode to Watson 20 inch television
TO ENTER SERVICE MODE
  • In the Stand-By mode, the factory(Service) mode is activated by pressing the DISPLAY + MENU + 3 + 8 + POWER(ON) button in sequence on the remote controller.
  • The menu of the factory mode will be displayed.
  • Select each adjustment mode by pressing CH up or CH down button.
    And access it by pressing vol up(+)or vol down(-) button.
The factory mode consists of 9 components:
  1. SCREEN
  2. W.BAL
  3. PICTURE
  4. SERVICE1 > ;You do not need to Select it.
  5. VOLUME TEST > ;You do not need to Select it.
  6. Device Check  > You do not need to Select it.
  7. OPTION
  8. EEPROM Reset  > You do not neet to Select it
  9. UOC Control  > You do not need to Select it.
V-CHIP TEST  > You do not need to Select it.
To Exit service mode, switch OFF the set by its front panel Power Switch.

at