DISASSEMBLE THE THE PHONE AS DESCRIBED EARLIER POST
- Remove the four screws at the arrows. Use screwdriver, torx no 6. Removed screws cannot be reused and must be scrapped.
- Remove the dust gasket, inside the new front, with a pair of tweezers. Make sure no dust, particles or adhesive remains on the glass.
- Place the front over the frame. Very important: Check for dust inside the phone before assembling the front. Use air blow equipment. Place the front over the frame.
- Mount the screws, with washer. Use Torque screwdriver torx no 6 set to 20 Ncm Screw until the torque is reached. Removed screws cannot be reused and must be scrapped.
