PANASONIC TX-R32LE8K TX-R32LX86K_ LCD TV_LED BLINKING CODES_SELF-CHECK FUNCTION _ SERVICE MODE & ADJUSTMENTS _ HOTEL MODE

SELF CHECK FUNCTION

Self Check is used to automatically check the bus lines and hexadecimal codes of the TV set.

• To get into the Self Check mode, press the [DOWN] button on the customer's controls at the front of the set, at the same time pressing the [MENU] Button on the remote control. The screen that will show is represented by Figure.
• Press both [OFF TIMER] button on the remote control and [DOWN] key button on the control panel.
• Press the [NORMALIZE] button (on the remote control) to Exit.

POWER LED BLINKING CHART

• When an abnormality has occurred in the unit, the protection circuit operates and resets to standby mode. At this time, the defective block can be identified by the number of blinks of the Power LED on the front panel of the unit.

SERVICE MODE & ADJUSTMENTS

SERVICE [1]

• To enter service mode; set channel 99, then set the timer to 30 min. Press the [RECALL] Button on the remote control and the [ -- ] button on the LCD panel.
• Press the red button (on the remote control) for adjustment below.

SERVICE [2]

• Select CEC CHECK mode in service 1, then press the [HOLD] button (on the remote control) to enter service 2.

HOTEL MODE ADJUSTMENT

1. Press the [VOLUME DOWN] button on the TV panel while pressing the [TV/AV] button on the remote control.
2. Press the [MENU] button on the remote control to Exit the Hotel Mode Function.

Click on image.  Right click on the enlarged image, save image as, to a folder.   View it in ‘Picasa’ picture viewer.  There you can enlarge it more.  Download ‘Picasa-3’ by Google site, and install it to your system.  It’s free software from Google and download it by Google. [Search for ‘Picasa’ by Google]

DVCO ADJUSTMENT

Measuring instrument	Instrument name	Connect to	Remarks
	Remote control  composite Output device	AVI AV input  terminal
Adjust	Procedure
	1. <DVCO Adjustment> AVI PAL/fp = 4.43361875 MHz Receive the colour bar pattern at AVI composite video. Signal generator: PAL/fp = 4.43361875 MHz (ref.) 2. Service 1 Go to .DVCO. under Service 1 by pressing [FA] + [4] on the remote control. 3. Perform automatic adjustment of DVCO using the blue key.  (About 3 sec.) DVCO (START) The display color of DVCO shows as black (START) à red (under adjustment) à black (completion)		RF/PAL [Another method] Receive the PAL color bar Pattern at RF. EEPROM Address of DVCO Adjustment value 238 ~ 239