V-CHP MENU
- V-Chip is transmitted from TV station to help parents monitor what their children watch. According to the pre-set of factory, viewers can see all of the channels. However, setting V-Chip can block the appointed channels.
- To set up V-CHIP function: Press V-CHIP button → enter the password → press ENTER,and the following screen will be displayed.
Note: The
factory default of the password is “0000”.
""If
you have changed the password, please make sure you remember the new password,
because you cannot recall the default setting of the password by any selection.""VGA DDC KEY IN: Equipment needed
- DDC Card
- PC
- RS-232 cable
- Barcode Reader
- VGA Cable
- Connect VGA Card and DDC Card with RS-232 cable.
- Connect DDC Card and N2752W LCD TV with VGA Cable. (When key in DVI DDC information, use VGA transform to DVI port.)
- Connect Power Cord to N2752W LCD TV.
- Run DDC.exe
- Choose model number and conform the Time then Press “ENTER” key.
- When appear the PIC “ choose DDC Card”, Press ALT+2 Enter DDC 2B test interface.
- Choose DDC card
- Press F8 to choose corresponding model. DAT (N2752W-A.DAT press “ENTER” key)
- Press F9 enter the download interface.
- Key in the serial number or use the barcode reader to scan the barcode of the LCD TV, and press “ENTER” key.
- The successful picture is as follows. “Compare EDID:OK! Press any key to continue”.
CHECK METHOD
- Use ViewSonic EDID Editor.
- Connect the N2752W LCD TV to PC with VGA Cable. Execute the EDID Editor, then Press Ctrl+F5. If the DDC is correct, you can see the information as follow:
