Wednesday, April 24, 2013

FUJITSU P42HCA30 - PLASMAVISION - ERROR MESSAGES - LED BLINKING CODES


ERROR CODES
OSD
Three kinds of error messages are displayed on the screen, and the power is turned off 10 sec later.
LED
LED error is displayed continuously after the power is turned off.
OSD
On screen display
Cause
Check point

ERROR MESSAGE CONDITION 1
Fan protector operated
Fan
Main power PCB
Main/Digital PCB

ERROR MESSAGE CONDITION 2
Temperature protector
operated
Ambient temperature of unit
Main/Digital PCB
Temp. sensor IC6950
LED
LED lamp display status
Cause
Check point

Steady light (Red)
Stand-by status
   -----------------------
1 time (Red) / 1 time (Green)
Flashes once Red LED and flashes once Green LED every 3 sec.


No power.  Power supply protector operated

Main power PCB
1 time (Red) / 2 times (Green)
Flashes once Red LED and flashes twice Green LED every 4 sec.


No power.  Power supply protector operated

PDP panel
1 time (Red) / 3 times (Green)
Flashes once Red LED and flashes three Green LED every 5 sec.

No power.  Power supply protector operated.

Main/Digital PCB
2 times (Red) / 1 time (Green)
Flashes twice Red LED and flashes once Green LED every 4 sec.


Temperature protector
Operated

Ambient temperature of unit
2 times (Red) / 2 times (Green) Flashes twice Red LED and flashes twice Green LED every 5 sec.


Temperature protector
operated

Main/Digital PCB
Temp. sensor IC6950
3 times (Red) / 2 times (Green) Flashes three Red LED and flashes twice Green LED every 6 sec


EEPROM device fault

Main/Digital PCB
3 times (Red) / 3 times (Green) Flashes three Red LED and flashes three Green LED every 7 sec


EEPROM device Read /
Write fault

Main/Digital PCB
4 times (Red) / 1 time (Green)
Flashes four Red LED and flashes once Green LED every 6 sec


Main/Digital circuit fault

Main/Digital PCB
5 times (Red) / 1 time (Green)
Flashes five Red LED and flashes once Green LED every 7 sec


Video circuit fault

Video PCB
6 times (Red) / 1 time (Green)
Flashes six Red LED and flashes once Green LED every 8 sec


Fan protector operated

Fan-1
Main/Digital PCB
6 times (Red) / 2 time (Green)
Flashes six Red LED and flashes twice Green LED every 10 sec




Fan protector operated

Fan-2
Main/Digital PCB