HOW TO DISASSEMBLE DELL 1907FPc_LCD MONITOR

DISASSEMBLE PROCEDURE

• Rotate the stand to allow access to the stand release button.
• Press the Stand release button and lift up the Stand and away from the monitor.
• Remove the 4 screws.
• Pry the monitor up then find out the hooks’ position, use the tool (like the picture or other card) to insert into the gap of bezel and rear cover.

• Take off the bezel.
• Turn over the monitor as the Fig, hold the rear cover, and then slightly remove it.
• Remove the 4 screws.

• Remove the USB2 board cover.
• Remove the 5 screws.
• Disconnect the wire harness between USB1 and USB2.

• Push the main shield as the arrowhead direction.
• Disconnect the connector pin: Disconnect the connector pin between key and main boards.