Friday, April 04, 2014

GRUNDIG THARUS 51 - LCD 51-9410 DOLBY - DISASSEMBLE - ADJUSTMENTS


DISASSEMBLE PROCEDURE
Rear Panel

Unscrew 2 screws A and remove the rear panel.
ATS Reset
Press mains button "ON" while holding down the ">" button on the remote control.
The basic analogue values are loaded.
The ATS bit is set. When switching on the next time, this option releases the ATS euro plus function. The current program allocation (channels) is cleared.
Electronic Program Lock (parental lock)
Enter the key sequence "7 0 3 8 5 8 0" to cancel your personal code number.
Software Version Number
Call up the "EASY DIALOG" menu. Pressing the green button indicates the software version number.
Factory Settings
Press the "i", "red" and OK buttons to call up the factory settings.
Switching the Blue Screen Background On and Off
Call up the "Blue screen" menu via "EASY DIALOG" –> "Installation" –> "Dealer service menu" –> Code number "8500" –> "Picture settings".  Select "on" or "off".
Front-LED
Call up the "Front-LED" menu via "EASY DIALOG" –> "Installation" –> "Only for the retailer" –> Code number "8500" –> "Hardware equipment".  Select "3 Colors" or "1 Color".
Watchdog On/Off
Call up the "Watchdog" menu via "EASY DIALOG" –> "Installation" –> "Dealer service menu" –> Code number "8500" –> "Special functions".  If the Watchdog timer is not reset in regular intervals, a new start is initialized.  Set the Watchdog to "off" or "on".