Using the remote controller to enter into Factory Menu.
Press Menu to call main menu displaying on the screen. And
then press “8”,“ 8”,“9”,“3”,“OK” in turn. You will see the screen displaying as
following. You can check the version of the software, adjust some settings. But
we don’t advise you change these settings. Because of the TV has already held
in the state of optimality. If you have to change these settings, please connect
with the local service center.
FACTORY MENU
CURRENT SOFTWARE VERSION
AGING MODE IS FOR FACTORY RUN IN TESTING
RF Upgrade is for debugging, and do not change anything
commonly.
Service Menu is for debugging, and do not change anything
commonly.
Auto Color is for debugging, and do not change
anything commonly.
Remark: The date of the chart only is a example,
please don’t adjust the factory mode base on it.