Wednesday, April 02, 2014

HOW TO ENTER SERVICE MODE - ADJUSTMENTS - KONKA KDL26BZ31U KDL32BZ22U

SERVICE MODE ENTRY & ADJUSTMENTS
Applicable to KONKA - KDL26BZ31U KDL32BZ22U KDL32BZ23U KDL32BZ25U KDL32BZ25U-A KDL32BZ31U KDL37BZ23U KDL37BZ25U KDL37BZ25U-A KDL37BZ31U KDL42BZ23U KDL42BZ31U KDL42BZ25
The way to enter factory menu
* Press “Menu” button and then press “Pre.Ch” button five times, you can enter the factory   menu, and the software version information is shown in the last line.
The way to exit factory menu
* Press, “Exit” to exit the factory menu, the value you have changed will be save automatically.
Factory menu operation method
* Press the “Up / Dn” to select the item you desired change, and press “OK” to set the value.
White balance adjustment
* Receive black or white signal under AV or PC mode, adjusting brightness and contrast to set the brightness to 5 Nit in dark area and 90 Nit in bright area.
* Adjust white balance. Enter factory menu, select “White Balance” item, and enter to the White Balance Adjust Menu.
WBRO 0-100
WBGO 0-100
WBBO 0-100
WBRG 0-100
WBGG 0-100
WBBG 0-100
Adjusting chromaticity coordinates of black and white to fit the requirement.
Cool(9300K) x=0.283±0.015 , y=0.297±0.015
Normal(7500K) x=0.299±0.015 , y=0.315±0.015
Warm(6500K) x=0.313±0.015 , y=0.329±0.015
Gamma Table Loading
Enter factory menu, select “White Balance” item, and press “OK” to set the value.
Burn on
** When source is in TV mode, select the item of“Burn On” in factory menu, keep the state for “On” by pressing “OK” button. After putting on the burning switch, the TV set will be boot up straightly and keep in the snowflake burning on state if you put on the power supply. Here, the function that auto power-off after in 15 minutes while no signal input will be invalid. When the burning on finished, please change the “Burn on” state to “Off”.
Parameters Setting
* Select the item of “Parameters Setting” in factory menu, press “OK” to enter Parameters Setting Menu. Then you can set some value for volume and image features.
Auto Colour
Select the item of “Auto Colour” in factory menu, press “OK” to start auto adjust the colour.
AGC
* Select the item of “AGC” in factory menu, press “OK” to set the value (0/1/2/3/4/5/6), then choose the value for the best image effect.
Software Resetting
** In factory menu, select the item of “Set Default Value” , press “OK” button and turn off TV, then turn on. This operation can clean up all data that modified by users, and make the data go back to default settings.
Advanced Video Menu
* Select the item of “Advanced Video Menu” in factory menu, press “OK” to enter Advanced  Video Menu. Then you can set some value.