SERVICE MODE
While pressing [VOLUME-] button
of the main unit, press [RECALL] button of the remote control transmitter three
times in a row (within 2 seconds).
Adjustment method.....Use the remote control.
[1] button...Main items Selection in forward
direction
[2] button...Main items Selection in reverse
direction
[3] button...Sub items Selection in forward
direction
[4] button...Sub items Selection in reverse
direction
Cancellation
Switch off the power with the
[POWER] button on the main unit or the [POWER] button on the remote control.
Contents of adjustment mode
Value is shown as a hexadecimal
number.
Preset value differs depending on
models.
After entering the adjustment
mode, take note of the value in each item before starting adjustment.
Preset Values
Self-check function
When phenomena like "the
power fails from time to time" or "the video/audio fails from time to
time" can not be confirmed at the time of servicing, the self-check
function can be used to confirm the occurrence and to limit the scope for the
defective circuits.Also, when "the power fails from time to time",
display on the screen can be used to confirm the occurrence and to limit the
scope for the defective circuits. Any programmed channels, channels caption
data and some other user defined settings will be erased and return to factory
setting.
How to access
Produce TV reception screen and,
while pressing [VOLUME-] button on the main unit, press [SLEEP] button on the
remote controller unit simultaneously.
To Exit
When one of the buttons for
channel selection etc. is pressed, the display returns to the normal screen.
SELF CHECK SCREEN DISPLAY