LCD COLOUR TELEVISION LC-32LE240M - LC-32LE340M_Public Mode_ Software upgrading_ EDID DATA INPUT [HDMI EDID]
& [ANALOG PC EDID]
ADJUSTMENT PROCEDURE
Entering and cancel the adjustment process mode
1. While holding down the TV/VIDEO and Volume DOWN keys at
the same time, plug in the AC cord to turn on the power. (“K” standing for
inspection process mode is displayed on the upper left position of the screen.)
2. Press the Channel DOWN and Volume DOWN keys at the same
time. (The adjustment process mode screen appears.)
3. To cancel it, turn off the power using the Power switch
or remote control.
Remote controller key operation and description of display
in adjustment process mode.
(Input mode is switched automatically when relevant
adjustment is started so far as the necessary input signal is available)
Software upgrading.
1) Plug off the LCD TV.
2) Insert the USB device to the USB terminal at the LCD TV.
(Make sure that the latest software is installed in the USB device).
3) Hold the LCD TV power key and plug on the LCD TV.
4) LCD TV is on and detecting the USB device. A few seconds later, the software upgrading will start
automatically.
Let the process running & entering verification.
Software is successfully installed when the following
appears at the end of the process.
Plug off the LCD TV and plug ON again as usual.
LCD TV is running with the latest software.
EDID DATA INPUT [HDMI EDID] & [ANALOG PC EDID]
Main Software Package.
Main Software File name: XXX is Software version.
If any changes of software, will be informed by MARUHEN.
How to start Public Mode.
1) Press the “INPUT” and “VOL (+)” keys on the set at once
and turn on the power.
2) Get the password input screen displayed.
Procedure
The input starts with the leftmost digit.
* Use the numeric keys [1] thru [9] and [10/0] keys on the
remote controller. * * The other keys are
not acceptable.
With a numeric-key input, “–” will change to " * " . The input
position will move one digit to the right.
With all the 3 digits entered, the password will be
verified.
3) The 3-digit password is now verified.
The password [0] [2] [7] provides for the public mode
screen. (This screen comes on with whatever adjustment process settings.) With any other passwords, the screen changes
to the normal mode.
In the adjustment process mode, turn on “PUBLIC MODE”. Also
press the “CH (▲ )” and “VOL (+)” keys on the set at once and turn on the power.
How to exit Public Mode
There are the following ways to quit the public mode setup
screen.
Public Mode Menu
The guidance is not displayed onscreen.
Setup procedure:
* To move the cursor up and down, use the “cursor UP/DOWN” key
(remote controller) and “CH ▲/▼” key (remote controller and set).
* To change the settings, use the “cursor RIGHT/LEFT” key
(remote controller) and “VOL (+) / (–)” key (remote controller and set).
* To save new settings, keep the cursor at “Execute” and use
the “cursor RIGHT/LEFT” key (remote controller) and “VOL (+) / (–)” key (remote
controller and set).
CLICK ON THE PICTURES TO MAGNIFY
On Setting Items [1-POWER ON FIXED]
