TO ENTER SERVICE MENU OPTION
- Turn the TV set ON, and put it to 'Standby'.
- Press On Screen Display button.
- Press digit "5" button on the remote control.
- Press [Volume (+)] button on the remote control.
- Press [TV] button.
- To navigate the Service Menu, use "1' & "4" buttons.
- To adjust the data value, use "3" & "6" buttons.
- To "Exit" from service mode, switch OFF the set.
CODES ON THE SCREEN
- ODL => Power On Delay.
- OSH => On Screen H-Position.
- MUT FTZ => Muting On. [do not adjust this item]
- VAM => Vertical Size [Amplitude]
- VBC => V-Breath correct. [Do not adjust].
- PAM => Parabola Amp.
- PTI => Parabola Tilt.
- VLI => Vertical Linearity.
- CCR => Corner Correction
- HAM => Vertical Centre.
- BIN => Blue Intensity.
- RIN => Red Intensity.
- CLS => Colour System.
- SBR => Sub-Brightness.