[3]
All connection settings are described as previous post.
READ DDC DATA FROM MONITOR.
All connection settings are described as previous post.
READ DDC DATA FROM MONITOR.
- Click 'Tools' icon from the toolbar to bring up the Channels 'configuration setup'
Select the DDC2Bi as communication channel.
Click 'OK' button to confirm selection.
Click 'Read EDID function' to read DDC EDID data from monitor. The EDID codes will display on screen.
Click 'New' function icon from the tool bar, bring up step 1 of 9
EDID46DDC application provides the function selection and text change; select & fill out; from step1 to step 9.
Step-4: Modify DDC data:
- Click next
- Click next
- Click next
See screen shots:
4. Click next
5. Click next
See screen shots
Click next.
In this step confirm the Descriptor Data Type is Monitor Range Limits, and all the items are same as below.
Click next.
Click 'Finish' to Exit setup. Serial number can be filled up at this moment. For example [26MF605002].
Must modify the Serial number in step 9, otherwise the serial number in OSD couldn't be modified correctly.
Step-5: Write DDC Data.
Configuration should be like this.
Press "OK".
Access Factory mode [Refer previous post for details]
Push 'Menu' to Exit OSD menu.
Click [Write EDID] icon from the tool bar to write DDC data. Wait for 20 to 30 seconds. DDC data will be finished Writing.
To save DDC data: Click Save as. [If you want to save]
Pull down the File Menu, and press 'Exit'.
Turn OFF the monitor, Exit Factory Mode.