TO ENTER SERVICE MODE
- To enter service mode press the remote control keys in sequence: If factory remote control is not available.
{Power Off => Mute => 1 => 8 => 2 => Power On}
TO ACCESS SERVICE MODE [Using customer remote control]
- Turn the Power Off and set to standby mode.
- Press the remote buttons {Power-Off => Mute => 1 => 8 => 2 => Power On} to turn On the set.
- The set turns On and enters Service Mode. This may take approximately 20 seconds.
- Press the Power button to Exit, and store the data into memory. If fails to enter service mode, repeat the above steps
INITIAL SERVICE MODE DISPLAY STATE
=============================================
Option
--------------------------------------------------------------------------------
ADC/WB
--------------------------------------------------------------------------------
Control
--------------------------------------------------------------------------------
Advanced: 0->0->0->0->EXIT
--------------------------------------------------------------------------------
Expert
--------------------------------------------------------------------------------
T-CRLIBRFC-xxxx(FHD), T-CRLIBRHC(HD)
T-CRLIBRS-xxxx
DTP-LP-0144-01
DTP-LP-App-0126-01
OPTION: E030 01
ADC: HDMI COMP PC AV
EDID: FAIL / SUCCESS
Build date: Month-day-year
Date of purchase
--------------------------------------------------------------------------------
HOW TO ENTER HIDDEN FACTORY MODE
- into the factory mode
- move the tap to Advanced
- key input: 0 + 0 + 0 + 0
- ** hidden menu: Advanced
BUTTONS OPERATIONS WITHIN SERVICE MODE
- Menu: Full Menu Display / Move to Parent Menu.
- Direction keys [Up/Dn]: Item selection by Moving the Cursor.
- direction keys (< / >): Data increase or decrease for the selected item.
- Source: Cycles through the active input source that are connected to the unit.
No comments:
Post a Comment