PANASONIC TH-42PX75U - H-50PX75U - TH-42PX77U - TH-50PX77U - PLASMA TV - LAYOUT & PART NUMBERS - DRIVER SETUP ADJUSTMENT

TH-42PX75U [BOARD NAME & PART NUMBER]

LAYOUT

TH-50PX75U [BOARD NAME & PART NUMBER]

LAYOUT

DRIVER SETUP ADJUSTMENT

• Input a white signal to plasma video input.

1. Picture menu: Vivid

1. Normal: Set

1. Aspect: Full

• First perform Vsus adjustment.

• Confirm the voltage level ofVSCN. This should be done after the adjustment of Vad which should be -105V When Vad= -105V, Vscn voltage is 40V ±4V.  See the panel label for voltages.

Connect an Oscilloscope to test point TPSC1. Using VR6602, adjust (T2)for 195+/-10µ Sec.

Set the picture controls as follows.

Caution

Input a 100% White signal to the unit.

Set the picture controls as follows:

Picture menu : Vivid

Normal : Set

Aspect : Full

TH-42PX75U/ TH-42PX77U DRIVER SETUP TABLE

TH-50PX75U/ TH-50PX77U DRIVER SETUP TABLE