FACTORY MODE [SERVICE MODE]
Method one˖ In any sources enter
to the menu, move the cursor to “Contrast” item then press the “9”, “7”, “3”,
“5” keys continuously on the remote control.
Service mode screen will be displayed.
Method-2: In the production of
the factory menu, if set “FacMode” and “Fac Hotkey” as “ON”. There is a “P” on the left corner of the
panel. In this status, can enter the
factory menu by pressing the “Return” key, by remote control. In the factory menu, you can return to the
previous menu by the “Menu” key of the RC.
To Exit Factory mode
* Press
the ‘Exit' key on the remote control.
* Press the ‘Menu” key on the remote control, to go back to the previous menu.
* Press the ‘Menu” key on the remote control, to go back to the previous menu.
. * If
the hot-key of factory menu is “On” the status cannot be changed by turn off the
TV. You need to change the hot-key to factory “OFF”
* “Shop Init” should be done at the last alignment.
* “Shop Init” should be done at the last alignment.