TO UNLOCK FPA LOCK
Most RCA & GE TV sets use a four digit code to control the V-Chip. The code reset will be different to model to model. Try each following proceedings until you find the one that works with your set.
- HOLD DOWN the MENU button on the remote control and VOLUME DOWN button at the FRONT PANEL of the TV set simultaneously for more than 6 seconds. THE SET WON'T SAY SO, BUT THE LOCK WILL BE UNLOCKED.
- HOLD DOWN the Zero [0] button on the remote control and VOLUME DOWN button on the FRONT PANEL of the TV, for more than 5 seconds. THE SET WON'T SAY SO, BUT THE LOCK WILL BE UNLOCKED.
- HOLD DOWN THE menu BUTTON on THE FRONT OF THE TV and TV button on the remote at the same time for more than 5 seconds.
- HOLD DOWN "EJECT" button at the front panel of the TV, MENU button on the remote control, simultaneously at least 5 seconds.
Depending on model, one among these methods must unlock your RCA or GE TV If desired you can change the settings on the V-Chip, by going the MENU and going to PARENTIAL CONTROL s, or on some sets, goint to MENU, and then going to TV SETUP, then go to V-Chip set.
***********************************************************************************