CARK126
ENSURE THAT THE VEHICLE’S BATTERY IS DISCONNECTED BEFORE YOU START THE INSTALLATION PROCEDURE, AND THAT IT REMAINS DISCONNECTED DURING THE PROCEDURE.
COMPONENTS OF CARK126
- The CARK126 includes the above parts. Please note that the items surrounded by broken lines are not supplied with the CARK126 in Europe and Asia.
- In the US, Canada and Latin America other sales packages than the CARK126 exist. The main difference is that the mobile holder and antenna coupler are included instead of being sold separately. External antenna AMD-2 is not sold in the US, Canada and Latin America.
- Other mobile holders connectable to CARK126 are MBC-14M, MBC-13L and MBC-17. MBC-17 is sold in the US, Canada and Latin America both separately as well as a part of Cark142. Privacy handset HSU-3 is sold in Europe only.
COMPONENT PARTS
Mobile holder MBC-15S
The holder for the
mobile phone is always attached to the vehicle’s interior in an upright position
using the swivel mount HHS-15, as shown in the following Figure 2. The mounting
is secured with a screw (included with the HHS-15). The screw recess is covered
with the NOKIA logo plate.
Swivel mount HHS-15 and
Mounting plate MKU-1
The HHS-15 is a
swivel mount which offers two installation methods for the MBC-15S holder.
Either use all the components to make a swivel mounting, or use the flat
mounting plate for a fixed position.
Exploded view
Mounting
plate MKU-1
The HFU-4 handsfree
unit is attached to the vehicle’s interior using the MKU-1 mounting plate. The
mounting is secured with a screw (included with MKU-1).
Handsfree unit HFU-4
The HFU-4 handsfree unit enables the
phone to operate in handsfree mode. It is attached to the vehicle’s interior
using the MKU-1 mounting plate. The mounting is secured with a screw (included
with MKU-1).
System cable SCU-4
The system cable
SCU-4 plug-in connector connects to the PHONE socket in HFU-4 and to the bottom connector
underneath the AXF-15S. (The other cable from the AXF-15S connects to the
external antenna.)
Antenna coupler AXF-15S
The Antenna coupler
AXF-15S is used to create a contact with an external antenna. It is installed
between MBC-15S and HHS-15, and secured with a screw (included with AXF- 15S)
Power cable PCU-4
The power cable
connects to the DC socket in the HFU-4
and to the vehicle's power supply.
HF microphone HFM-8
The HF microphone
connects to the MIC
socket
in the HFU-4. Turn the plug clockwise to lock it firmly in place.
External HF speaker HFS-12
The external HF
speaker connects to the SPEAKER socket in HFU-4. Twist the plug clockwise to
lock firmly in place.
External antenna
An external antenna (not included)
is recommended for the car kit. It connects to the antenna coupler AXF-15S.
To meet FCC
guidelines for exposure to radio frequency devices, the external antenna must
be installed in a position so that no person will be within 20 cm (8 inches) of
the antenna. It is recommended that the external antenna be mounted on the roof
of the car in the middle for the center to the back portion of the roof of the
car, or, if a convertible, the middle of the trunk lid on that portion closest
to the car’s interior.
Privacy handset HSU-3 (not
included)
The privacy handset
HSU-3 offers more privacy during a call. It connects to the HANDSET socket in HFU-4.
Installation and wiring diagram by next post.
