- When the EEPROM has been replaced, the SVC data should be restored as the function of individual system and specification. When the EEPROM has been replaced White Balance Checking.
TO ENTER AND EXIT SERVICE MODE [SVC MODE]
- Press 5 Seconds MENU buttons on both TV set and Remote Controller at the same time to get into SVC mode.
- Press the PR “Up / Dn” button several times to find SVC Data.
- Input the corresponding SVC data referring to Table below with the VOL “ < / > “ key.
- Press TV/AV button to exit SVC mode.
WHITE BALANCE CHECKING
1. RF when it presses a SVC height from the
screen , with the SVC Mode Main screen movement
Panel23 : SSLTA230W1L02
Language Options : NORTH AME 3EA
Model : M
2. Option1
System : M USA
Text : EAST EU1
3. It presses the Menu of the remote control with the SVC Mode Main screen movement.
4. TV White Balance
Setting: All Start.
5. White balance setting.
6. Completion of white balance setting.
7. SVC mode setting finish.
EEPROM REPLACEMENT
When the EEPROM has been replaced, the SVC data should be
restored as the function of individual system and specification. When the
EEPROM has been replaced White Balance Checking.
Enter into the SVC mode, Initialize with default data.
- Press 5 Seconds MENU buttons on both TV set and Remote Controller at the same
- time to get into SVC mode.
- Press the PR ▲▼ button several times to find SVC Data.
- Input the corresponding SVC data referring to Table below with the VOL ◄/► key.
- Press TV/AV button to exit SVC mode.
FACTORY SETTINGS
CLICK ON TABLE TO ZOOM
