DISASSEMBLE THE PHONE AS DESCRIBED IN EARLIER POST
- Lift the display with your fingers. Open the display ZIF-connector with a pair of tweezers. Be careful not to damage the ZIF-connector. Do not touch the display glass with your fingers. Use the correct pair of tweezers.
- Remove the Flex film from the ZIF-connector with the flex film assembly tool.
- Take a new display assembly and mount it in the ZIF connector. Push the flex film into the connector with the flex film assembly tool. It is in the correct position when the edge is tight to the connector.
- Close the ZIF connector with a pair of tweezers.
- Assemble a new ZIF tape over the two ZIF connectors by hand or with a pair of tweezers.
- { ZIF = Zero Insertion Force }
- Don‘t forget to remove the LCD display protection foil with a pair of tweezers before reassembling the front.
