ERRISON 32LS16 - HOW TO ENTER SERVICE MODE

TO ENTER SERVICE MODE

• Press the menu” key on the remote control unit, move to SOUND submenu.
• Choose Balance(the character Balance” turn pink).
• Press the number keys 9883 in turn.

Use PROG+ / PROG - to choose the options, the option, which has been selected will display red.

After choosing the option, press VOL+ to enter the option, and then you can set different parameter.

• The options in system mainly contain the switch of some color and sound sys,set “YES”  or “NO” with the VOL+ key.
• Option Naming can be used to switch the naming of saving programs in APS.
• Option APS can switch the function of search and compositor in the searching state.
• Power up ATS can switch the Factory Reset in the FUNCTION MENU.
• The word in the < > at the right side of options shows the current option state, <yes> means “ON” and “NO”  means “OFF”
• The default state is “Yes”

When Option HDMI displays “YES”, HDMI is open and DVI is off, when it displays “NO”, the action is opposite. Option HDCP means to turn HDCP on/off (High bandwidth Digital-Content Protection). The third item shows to turn on/off the interface of Hi-Fi digital.  The default state is “Yes”.