[1]
- Remove the battery cover with your fingers. Slide the battery cover down.
- Remove the battery from the phone by overturn the phone.
- Remove the rubber plug, for the external antenna, with a pair of tweezers.
- Remove the camera ring by using the front opening tool. Place the tool under the camera ring in the arrow direction.
- Turn the tool until a click sound is heard. Remove the camera ring.
- Remove the antenna cover. Use the Antenna Cover Opening tool. Push the tool inside the battery cavity in the arrow direction until it contacts the battery cavity wall. The cover should only be pushed until the snap lock is released and a .click. sound is heard.
- Be careful not to damage the close clips on the antenna cover with the antenna cover opening tool. If you damage it you must replace the antenna cover.
- Remove the antenna cover, with your fingers, in the arrow (1) direction.
- The on/off key sometimes falls out when the antenna cover is removed. The arrow (2) shows the on/off key location.
- Remove the antenna assembly by using the front opening tool NTZ 112 302.
- Place the thumb on the antenna assembly at the left side to release the assembly in a controlled way
- Remove the 4 screws.
- Open the phone with the front opening tool. Be careful not to scratch the phone with the front opening tool.
- Begin as the picture shows. If necessary gently move the tool along the gap both ways until the latch on the inside is loose. If necessary do the same thing on the other side.
- Remove the keyboard with your fingers.
Contd:
