HUNDAI - HLT 3220 _ LCD TV _ SERVICE MODE

SVC mode data Adjustment

     When the EEPROM has been replaced, the SVC data should be restored as the function of individual system and specification

Enter and exit SVC mode

Note: into the SVC mode, Initialize with default data.

• Press 5 Seconds MENU buttons on both TV set and Remote Controller at the same time to get into SVC mode.
• Press the Yellow button several times to find SVC Data.
• Input the corresponding SVC data referring to Table below with the Volume Up/down key.
• Press the OK button to memorize the data.
• Press TV/AV button to exit SVC mode.