How to download EDID DDC DATA - LG26LC2R - LG32LC2R LCD TV
Extract a Zip file
Caution: Use the proper signal cable for EDID Download.
Caution: - Never connect HDMI &
D-SUB Cable at the same time.
Use the
proper cables below for EDID Writing.
EDID DATA Analog Set : 128bytes
EDID DATA HDMI Set : 256bytes.
Detail EDID
Options.
PRODUCT ID
Model Name
|
Product ID
|
||
Dec
|
Hex
|
EDID table
|
|
26C2R
|
22045(A)
|
561D
|
1D56
|
22046(B)
|
561E
|
1E56
|
|
32LC2R
|
30057(A)
|
7569
|
6975
|
30058(D)
|
756A
|
6A75
|
|
37LC2R
|
30059(A)
|
756B
|
6B75
|
30060(D)
|
756C
|
6C75
|
b. Serial No: Controlled on
production line
c. Month, Year: Controlled on
production line: ex) Montly: ‘03’ => ‘03’ Year: ‘2005’ => ‘0F’
d. Model Name(Hex)
Model Name Model Name(HEX)
26LC2R-TJ 32 36 4C 43 32 52 2D 54 4A
32LC2R-TJ 33 32 4C 43 32 52 2D 54 4A
e.Checksum: Changeable by total EDID data.
Connecting diagram of equipment for
measuring (For Automatic Adjustment)
[Push the "POWER ON" key at the Adjust Remocon before Adjustment
of W/B, the Baud rate & PSM, CSM will change 115200bps, Standard (MJ:
Optimum), Normal]
Adjustment
of White Balance for Manual adjustment.
- Operate the zero-calibration of the CA-110 or CA-210, then stick sensor to LCD module when you adjust.
- For manual adjustment, it is also possible by the following sequence.
Select RF no signal by pressing
"POWER ON" key on remote control for adjustment then operate heat run
more than 15 minutes.
Supply 216Level (85 IRE) Gray pattern
to Video input.
26/32LC2R-ZJ : AV3 or AV4(Input 50Hz)
26/32LC2R-TJ : AV1or AV2(Input 50Hz),
26/32/37LC2R-CJ : AV1 or AV2 (Input
50Hz)
26,32LC2R-MJ : VIDEO1 or VIDEO2
(Input 60Hz)
Press the POWER ON KEY on R/C for
converting input mode.
Enter the White Balance adjustment
mode by pressing the IN-START key (White Balance) on R/C.
Stick sensor to center of the screen
and select each items (Red/Green/Blue Gain and Offset) using / (CH +/-) key on
R/C.
Adjust Only High Light with R Gain /
B Gain using / (VOL + / -) key on R/C.
Adjust it until color coordination
becomes as below. (Initially, R/G/B
gain and R/G/B offset values are fixed as below).
Red Gain : 80 , Green Gain : 80 ,
Blue Gain : 80
Red
Offset : 80, Green Offset : 80 , Blue Offset : 80
Target Value [PSM: Standard(ZJ, TJ,
CJ), Optimum(MJ), CSM: Normal].
Normal (9300K) x ; 0.283±0.003 y ;
0.298±0.003 => Reference Value(Automatically fixed)
Cool(11000K): x:0.274±0.003, y:
0.286±0.003
Warm(7200K) : x:0.303±0.003, y:
0.319±0.003.
When adjustment is completed, Exit
adjustment mode using EXIT key on R/C.
