- Connect the DC-in cable connector to the main board connector.
- Align the left side connectors of the main board to the slots on the lower case, and then push to install the main board.
- Secure the two (2) screws to the main board and the lower case.
Connect the following to the main board connectors:
- Left speaker cable connector (A)
- LVDS cable connector (B)
- Right speaker cable connector (C)
- Microphone cable connector (D)
- USB module cable connector (E)
Perform the following:
- Route the auxiliary antenna cable (A, white) by the white line on the left side of the main board until it pass through the main board hole (C).
- Route the main antenna cable (B, black) by the white line on the right side of the main board until it pass through the main board hole (D).
- Attach the adhesive tapes to fix the antenna cables on the respective white lines.
- Route the main (black) and the auxiliary (white) antenna cable son the guides on the lower case.
