SONY BRAVIA - KDL-32CX525 - KDL-40CX525 - KDL-46CX525 [BRAZIL] - SERVICE MODE - DIGITAL - DETAILS

THE DIGITAL SERVICE MENU
TO ENTER

• TV must be in standby mode. (Power off).
• Access Service Mode by pressing the following buttons on the Remote Commander within a second of each other: [DISPLAY] à [CHANNEL-5] à [VOLUME +] à [POWER]

The DIGITAL Service Menu displays.

• NOTE: There are 3 Service Menus for this model, DIGITAL, CHASSIS, and VPC. 
• If the DIGITAL Service Menu is not displayed, press JUMP or OPTIONS on the Remote Commander.

SAMPLE DIGITAL SERVICE MENU DISPLAYS

VIEWING OR CHANGING DATA VALUES

• Within each Service Menu are Categories and data information.

• Use the buttons on the Remote Commander to review or change the service data.
• To change the Category, press 2 to move to the Next Category or press 5 to go back to the Previous Category.
•  Note: Pressing 2 or 5 only changes the Categories within the Service Menu displayed.
• To change the adjustment item, press 1 to move to the Next Item or 4 to go back to the Previous Item.
• To change the Data Value, press 3 to increase the Data Value or 6 to decrease the Data Value.
• Press MUTING then press 0 to WRITE  (Save) the changes.
• To exit service mode, press HOME or turn the TV power off.

VERIFYING THE SEGMENT CODE

• After updating the software, go into Service Mode to verify the Segment Code data value is set.
• CAUTION: Selecting the incorrect destination may requiring replacing the Main Board.
• TV must be in standby mode. (Power off).
• Access Service Mode by pressing the following buttons on the Remote Commander within a second of each other: [DISPLAY à Channel  5 à Volume  + àPOWER]

• Press 2 to move to the002 MODEL category.
• Using the table, press 3 to increase the data value or 6 to decrease the data value, to select the correct segment code data value.

• Proceed to “Verifying the Destination”.

VERIFYING THE DESTINATION

• The  correct  model  may  need  to  be  selected  after  updating  the software.
• Press 1 to move to the 001 DEST item.

• Using the table, press 3 to increase the data value or 6 to decrease the data value, to select the correct destination of the TV.

DESTINATION: BRAZIL   

DATA VALUE: BRA

CAUTION: Verify the DESTINATION is set correctly before proceeding to the next step.  If another destination Data Value is selected, it may possibly corrupt the software, which would require a Main Board replacement.

• Proceed to “Verifying the Model Name”.

VERIFYING THE MODEL NAME

• The correct model may need to be selected after updating the software.
• Press 1 to move to the 002 MODEL item.
• If the correct model does not display, press 3 until the model displayed matches the model of the TV.
• Press MUTING then press 0 to WRITE  (Save) the changes.
• To exit service mode, press HOME or turn the TV power off.

SETTING WHITE BALANCE ADJUSTMENTS

• White Balance adjustment data is located on the Digital Service Menu.
• Enter service mode.
• Press JUMP or OPTIONS on the Remote Commander until the VPC menu displays.
• Press 2 to move to “006 WB” Category.

• To change the data value of the R_DRV, press 3 to increase the value or 6 to decrease the value.
• NOTE: The data value must be set between the ranges 1 to 255.
• Press 1 to move to the next item (001 G_DRV).
• To change the data value, press 3 to increase the value or 6 to decrease the value.

Repeat steps for each of the following items:

002 B_DRV

003 R_BKG

004 G_BKG

005 B_BKG

• To save the changes, press MUTING then press 0.
• To exit service mode, press HOME or turn the TV power off.